Nantong Skyland Co., Ltd.

Block Heat Exchanger

Block Heat Exchanger
Product Detailed

Block Heat Exchanger

 

BLOCK HEAT EXCHANGER

The high conductivity and excellent compression strength make impregnated graphite an ideal material for the construction block heat exchanger. The two fluids circulate through two sets channels drilled in the block. Using with area between 0.5 and 800m2 can be produced using block varying in size between 200mm and 1800mm diameter.

Main advantages:

Rapid replacement of damaged blocks

Suitability for corrosive media on both service and product side

Easy maintenance

Reliable

Five classes diameter drill

Increase area by adding further block element

Because of these advantages graphite block heat exchanger are mainly used as

Condenser and Cooler

Heater

Evaporator

For absorption with simultaneous cooling

For Heat transfer between two corrosive media

Performance

Maximum transfer area: 800m2

Maximum pressure: 0.7Mpa for EB/1.0MPa for CBS/1.6Mpa for CBL

Maximum temperature:220ºC



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.